Ideal Boilers Classic RS 300 Installation & Servicing Manual

Ideal Boilers Classic RS 300 Installation & Servicing Manual Manual pdf 13 page image

13Classic RS - Installation & ServicingINSTALLATION1. Tape the template to the wall in the selected position.Ensure squareness by use of a plumbline, as shown.2. Mark out the position of the 3 wallplate screws, choosingone from each group of 3 holes. Also mark the position ofthe hole for the duct, the jacking screw and the top coverplate screws.3. Drill the 3 holes, 8 mm ( 5/16" ), and insert the 3 plasticplugs. Drill the jacking screw and the top cover platescrew holes 7mm (9/32") and insert the plastic plugs.4. Remove the template from the wall.IMPORTANT.The wall must be of suitable load bearing capacity.1. Cut the appropriate hole in the wall for insertionof the terminal assembly.Note.The terminal must not come into contactwith a combustible material such as that usedin the non-standard construction of timberframework and plasterboard etc.2. Fix the mounting plate to the wall with the 3No.14 x 50 mm screws provided.Check the jacking screw is fitted and screwed home.12 PREPARING THE WALL13 CHECKING THE BOILER11 WALL MOUNTING TEMPLATERear View of BoilerINSTALLATION