Ideal Boilers HE24 Installation And Servicing Instructions

Also see for HE24: User guide Installation and servicing Installation and servicing User guide User guide

Ideal Boilers HE24 Installation And Servicing Instructions Manual pdf 23 page image

23INSTALLATIONisar + programmer - Installation and Servicing25 MOUNTING THE BOILERIMPORTANT.1. Before mounting the boiler on the wall place it onits left hand side, fit the 'S' trap hose moulding/nutand fold the hose to facilitate fitting into pre-pipingframe.2. Ensure that the plastic plugs are removed fromboth the CH and DHW pipes before mounting.N.B. Some spillage of water may occur from thepipework when mounting the boiler to the frame.3. Lift the boiler onto the wall mounting frame,locating it over the tabs at the top of the frame.4. Lower the boiler into position, engaging it onto thesupport bracket.Note. Ensure the condensate drain pipe is correctlypositioned through the hole in the pre-pipingframe before continuing.5. Using the fibre washers supplied in the hardwarepack box, engage and then tighten the 4 waterunions.6. Engage and tighten the gas union, ensuring thatthe blue fibre washer is in place. DO NOTovertighten.7. Connect a pipe to the safety drain outlet using thenut and olive supplied in the boiler hardware packbox.nm8024timeP R O G R A M M E Rprogselect+-1INSTALLATION