Identivision IP-N410 Installation Manual
                                                                                | |
Contents
| 
Product specifications, parameters, functions of the device can change without notice! 27IDENTIVISION IP NVR INSTALLATION GUIDE6.11 PTZ Special functions：6.11.1 PresetSet a location for the preset, calls the preset points, PTZ automatically turns to the setting positionPreset optionSet a location for the preset, procedure is as follows:Step 1. click the Direction button will turn into preset position , click the Settings button to enterStep 2. click the Preset button , then write the preset points in the input blank,20. picture PTZ configStep 3. click Settings button, return the Complete setup, that is the preset points and preset positioncorresponds.Clear Preset：Input preset points, click Remove button, remove the presetPreset Point CallsStep 1. click Page Shift buttonStep 2. enter PTZ control interfaceStep 3. In the input blank, write the preset points, then click Preset buttonStep 4. PTZ turn to the corresponding preset point.21. picture PTZ control6.11.2 Cruise between PointsMultiple preset points connected cruise lines, call cruise between points, the PTZ run around on the line |
manualsdatabase
Your AI-powered manual search engine