Identivision IP-N410 Installation Manual
                                                                                | |
Contents
| 
Product specifications, parameters, functions of the device can change without notice! 37IDENTIVISION IP NVR INSTALLATION GUIDE9.2 Network settings34. picture Network settings[Net card] wireless or wired land card (check if the wireless is available in the specification)[DHCP Enable] automatic IP address configuration[IP address] IP address settings default: 192.168.1.10[Subnet mask] default: 255.255.255.0.[Gateway] default: 192.168.1.1[DNS settings] option to use a DNS server, which converts the IP address to DNS address. Reboot afterset.[TCP port] default: 34567 for CMS access[HTTP port] default 80 for Internet Explorer access[High speed download] Network high speed download[Quality strategy] there are 3 policies, adaptive, quality preferred, fluency preferred. Base on differentsetting, code stream is auto-adjusted, adaptive is eclectic between quality and fluency, also considersfluency when the quality is not greatly influenced. Fluency preferred and adaptive is valid only when theextra stream is enabled, if extra stream is not enabled, it will base on network status to adjust qualitypreferredNote: Changing the IP address in a POE compatible recorder, make sure to reboot after that! |
manualsdatabase
Your AI-powered manual search engine