607.3. WALL SWITCH INSTALLATION & OPERATION7.3.1. WIRINGYou can put the Main Switch of the SmartCase® into a wall switch by disconnecting the main switch of thesmart case and wire it to the wall switch. (It's only a signal running into wire (DON'T use any POWERSOURCE or you can permanently damage the SmartCase®)7.3.2. OPERATION WITH WALL SWITCHTo use fireplace without remote you have to: Set the 3 positions switch to the left position(ON). Use the wall switch to turn on and turn off thefireplace.N.B. The SmartCase® have an automatic 24 hoursauto extinguish. To ignite again simply turn off thewall switch and turn it on again.To use fireplace with remote and wall switch youhave to: Set the three position switch to centeredposition (remote) Keep the wall switch on and operate the fireplace with the remote.N.B. The wall switch now control the pilot and main power of the SmartCase. Like the bypassed main switch.The SmartCase® have an automatic 24 hours auto extinguish. To ignite again simply push power button onthe remote.
