J. D. NEUHAUS JDN mini Series Operation And Assembly Instructions
Also see for JDN mini 1000: Installation and operation manual
                                                | |
Contents
| 
Check air connection for contamination andclean if necessary. Blow through compressed air hose in order toremove foreign bodies. Attach the compressed air hose to the connectionon the hoist or on the service unit. Tighten theunion nut.The following lubricants are intended for normalenvironmental influences.In the case of wear-promoting environmental influ-ences, please contact J.D. NEUHAUS, to receive theappropriate instructions.C AU T I O N !Oils and greases can cause skin irritation.Wear protective gloves.AT T E N T I O N !Potential damage! Do not mix synthetic oilsor greases with mineral oils, as the propertiesmay be impaired.Also, never mix different types of lubricatinggrease within the synthetic or mineral lubri-cant groups.Synthetic lubricants must not be used whenoperating with oilers.Alcohols are not permitted for use as anti-icing agents.Attach the compressed air hose and tighten the unionnut.L U B R I C A N T SCO N N E C T I N G T O T H E M A I N A I R S U P P LYpowered by air!INITIAL OPER ATIONPage 21 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine