Jäger Z100-M628.03 S11 Manual

Transport and packagingItem no. 10206005, Revision 02 5 ( 40 )2 Transport and packagingAvoid strong vibrations or impacts during transportation, as these could dam-age the ball bearings of the HF spindle.Ü Any damage reduces the accuracy of the HF spindle.Ü Any damage restricts the functionality of the HF spindle.Ü Any damage shortens the service life of the HF spindle.2.1 Scope of supply of HF spindleThe following parts are supplied with the HF spindle:q High Frequency Spindleq Felt cleaning taperq Hexagon screwdriverq Transport packagingÜ Check the high frequency spindle for completeness upon delivery.2.1.1 Optional accessoriesAvailable on request:q Spindle holderq Frequency converterq Chillerq Collet greaseq Further accessories on request.Only approved accessories have been tested for operational safety and func-tionality.Ü Do not use any other accessories – this may invalidate any warranty claimsand compensation claims for damages.Ü If the spindle holder is to be produced in-house, it is essential to contactNakanishi Jaeger GmbH before starting production to request the toler-ances and production plan for the spindle holder.2.1.2 Documentation suppliedThe documents listed below are supplied with the HF spindle:q Manualq The declaration of incorporation is part of the manual.q Inspection protocolÜ Check that the documentation supplied is complete when the spindle isdelivered. If necessary, request a new copy.