Jäger Z42-D160.19 S3A Manual

Transport and packagingItem no. 10301083, Revision 10 5 ( 36 )2 Transport and packagingExample of design: Inserting theshankNote: Ensure functionalityu When transporting the HF spindle, always fit an appropriate shank in thecollet.Avoid strong vibrations or impacts during transportation, as these could dam-age the ball bearings of the HF spindle.Ü Any damage reduces the accuracy of the HF spindle.Ü Any damage restricts the functionality of the HF spindle.Ü Any damage shortens the service life of the HF spindle.2.1 Scope of supply of HF spindleThe following parts are supplied with the HF spindle:q High Frequency Spindleq Colletq Service setq Transport packagingÜ Check the high frequency spindle for completeness upon delivery.2.1.1 Service setq Collet greaseq Felt cleaning taperq Cylinder brush with eyeletq Ejector pinq O ringq Collet screw-in tool2.1.2 Optional accessoriesAvailable on request:q Spindle holderq Frequency converterq Further accessories on request.Only approved accessories have been tested for operational safety and func-tionality.Ü Do not use any other accessories – this may invalidate any warranty claimsand compensation claims for damages.Ü If the spindle holder is to be produced in-house, it is essential to contactNakanishi Jaeger GmbH before starting production to request the toler-ances and production plan for the spindle holder.