Jäger Z45-D160.05 S3 Manual

Technical SpecificationsItem no. 10301100, Revision 0116 ( 40 )6.2 Technical data sheet (KL2006 , AC-Motor)The power values (S1, S6, S2)are valid for sinusoidal cur-rents and voltages.The power values of the HFspindle are dependent on thefrequency converter used andmay vary from the indicatedvalues.Motor type 2/4-2Rated power 0,46 kWRated rotation speed 60.000 rpmCooling UncooledHeat dissipation via the mountMotor protection PTC 100°CWinding resistance 0,8 ΩPower dissipation 116 W – max. (S1)Measured values: S1-100%Rated rotation speed 10 000 20 000 30 000 40 000 50 000 60 000 rpmSpeed 7 953 18 323 28 513 38 399 48 346 58 232 rpmFrequency 167 333 500 667 833 1 000 HzRated power 0,07 0,16 0,25 0,32 0,405 0,46 kWTorque 0,084 0,084 0,084 0,08 0,08 0,075 NmVoltage 18 35 50 63 78 90 VCurrent 5 5 5 5 5 5 AMeasured values: S6-60%Rated rotation speed 10 000 20 000 30 000 40 000 50 000 60 000 rpmSpeed 6 995 17 368 27 553 37 643 48 019 58 068 rpmFrequency 167 333 500 667 833 1 000 HzRated power 0,078 0,213 0,343 0,460 0,543 0,629 kWTorque 0,106 0,117 0,119 0,117 0,108 0,103 NmVoltage 18 35 50 65 82 100 VCurrent 6 6,5 6,5 6,5 6,5 6,5 A