Jäger Z62-K260.03 S5 Manual

Declaration of IncorporationItem no. 10402003, Revision 02 39 ( 40 )15 Declaration of IncorporationUnder the EC Machinery DirectiveThe safety instructions of theproduct documentation sup-plied must be observed.Alfred Jäger GmbHSF-ElektromaschinenbauSiemensstr. 8D-61239 Ober-MörlenTel. +49 (0) 60029123 -0hereby declare that the product,Product High Frequency SpindleType Z62-K260.03 S5Serial no. See last page of manualas far as possible from the supplied, complies with the essential requirementsof the Machinery Directive 2006/42/EC.Sections of the Machinery Directive have been applied: 1.1.1; 1.1.2; 1.1.5; 1.3.2;1.3.4; 1.5.1; 1.5.2; 1.5.4; 1.5.5; 1.5.6; 1.5.8; 1.5.9; 1.6.4; 1.6.5; 1.7.1; 1.7.1.1; 1.7.2;1.7.3; 1.7.4;The incomplete machinery in its standard design complies furthermore withthe following applicable regulations:Applicable harmonized standards DIN EN ISO 12100Safety of machinesThe machinery is incomplete and must not be put into service until the ma-chinery into which it is to be incorporated has been declared in conformitywith the provisions of the Machinery Directive 2006/42/EC and any other ap-plicable regulations.We at Alfred Jäger GmbH agree to submit the special documents for incom-plete machines to national authorities upon request.The special technical documentation referred to in Annex VII, Part B, belong-ing to the machine has been created.Person who is authorized to compile the documents listed in Annex VII, Part B:Alfred Jäger GmbHOber-Mörlen, 05.10.2021Place and date of issueBernd JägerExecutive Board

/ 40

Related manuals for Jäger 10403025