JAI CM-200GE User Manual
Also see for CB-200GE: User manual
                                                            | |
Contents
| 
CM-200 GE / CB-200 GE- 19 -8.2.2 Video data rate (network bandwidth)The video bit rate for CM-200GE and CB-200GE is:♦ In case using Jumbo Frame, the packet data will be improved 2 %.♦ For CM-200GE and CB-200GE, the jumbo frame can be set at maximum 4040 Bytes ( Factorysetting is 1440 Byte ). To set Jumbo Frame, refer chapter 8.2.3.♦ When OB transfer mode is used, the maximum packet value is 867Mbit/s.To ensure the integrity of packets transmitted from the camera is recommended to follow these simpleguidelines:1. Whenever possible use a peer-to-peer network.2. When connecting several cameras, going though a network switch, make sure it is capable ofhandling jumbo packets and that it has sufficient memory capacity.3. Configure inter-packet delay to avoid congestion in networks switches.4. Disable screen saver and power save functions on computers.5. Use high performance computers with multi-CPU, hyper-thread and 64-bit CPU, etc.6. Only used Gigabit Ethernet equipment and components together with the camera.7. Use at least Cat5e or preferably Cat6 Ethernet cables.8. Whenever possible, limit the camera output to 8-bit.8.2.3 How to set Jumbo Frame(1) Click [start] and click [Control Panel].(2)Click [Performance and Maintenance].(3)Click [System].(4)Click [Hardware] tab.(5)Click [Device Manager].Model Pixel Type Packet data volume(In case the Packet size is 1500)MONO8 416Mbit/sMONO10_PACKED 624Mbit/sCM-200GEMONO10 832Mbit/sBAYRG8,BAYGB8 416Mbit/sCB-200GEBAYRG10,BAYBG10 832Mbit/s |
Related manuals for JAI CB-200GE
manualsdatabase
Your AI-powered manual search engine