CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA- 54 -11.4.2.2 Selecting of Trigger SourceThe trigger signal is chosen by TriggerSource of TriggerSelector in Acquisition Control.In the following example, pulse generator 0 is selected as the trigger signal.11.4.3 Setting the image size11.4.4 Acquisition of the imageThe settings for image capturing are controlled in Acquisition and Trigger Control or JAIAcquisition and Trigger Control. The following shows the screen.After the setting of capture is completed, push StartAcquisiton button. As for the detailsof each operation mode, refer to 10. Operation Modes.
