JAI GO-5100MP-PGE User Manual

JAI GO-5100MP-PGE User Manual Manual pdf 26 page image

— 26 —GO-5100MP-PGEBinning FunctionThe binning function allows you to combine the signal values of clusters of adjacent pixels tocreate improved virtual pixels. Using the function results in images with lower pixel resolutionand higher sensitivity.This camera performs both horizontal binning and vertical binning via digital addition oraveraging processing.The following four conditions must be met to use the binning function.1. [Polarize Image Selector] is [Raw Image] .2. The ROI function and binning function cannot be used at the same time.3. PixelFormat is one of Mono8, Mono10, and Mono10p.4. [VideoProcessBypassMode] is [Off].■ When horizontal binning only (2x1)The signal values of the pixels having polarizers at the same angle are combined. The signalvalues of the two pixels indicated by the red frames in the following figure are combined.The image data output from this camera becomes RawImage with 1232 pixels(horizontally) x 2056 lines (vertically).1232 pixels2056 lines■ When vertical binning only (1x2)The signal values of the pixels having polarizers at the same angle are combined.The signal values of the two pixels indicated by the red frames in the following figureare combined.