JAI SP-20000M-PMCL User Manual
                                                                                                                      | |
Contents
| 
SP-20000M-PMCL / SP-20000C-PMCL- 14 -Note1. In this table, all Tap Geometry items are not described. For instance, 1X2–1Y and 1X4–1Y show only10-bit. In case of 8-bit, upper 2 bits (D8 and D9) are not used.2. Please check whether the frame grabber complies with those formats if you use 80-bit (8Tap/10-bit)camera configuration.3. If you use 80-bit (8Tap/10-bit) camera configuration, DVAL and Exposure Active (JAI custom) arenot output through the Camera Link interface. FVAL is only output via Digital I/O-1 connector.5.2.2 Camera Link Pixel clockThe SP-20000M-PMCL and SP-20000C-PMCL use the Camera Link pixel clock of 80 MHz as thedefault setting. It can be changed.Table – 5 Camera Link pixel clockCamera LinkPixel ClockTapGeometryCamera LinkConfiguration Note80 MHz 1X8-1Y 80-bit, Full Defaut setting1X4-1Y Medium1X2-1Y Base60 MHz 1X8-1Y 80-bit, Full1X4-1Y Medium1X2-1Y Base[Note]If the Camera Link pixel clock is changed, the output is immediately changed but it maytake a few seconds for the output signal to be stable.Base Medium Full 80bit2Tap / 10bit 4Tap / 10bit 8 Tap / 8bit 8 Tap / 10bit1X2 - 1Y 1X4 - 1Y 1x8 - 1Y 1X8 - 1YPort G0 TxIN 0 ― ― Tap 7 D0 Tap 7 D2Port G1 TxIN 1 ― ― Tap 7 D1 Tap 7 D3Port G2 TxIN 2 ― ― Tap 7 D2 Tap 7 D4Port G3 TxIN 3 ― ― Tap 7 D3 Tap 7 D5Port G4 TxIN 4 ― ― Tap 7 D4 Tap 7 D6Port G5 TxIN 6 ― ― Tap 7 D5 Tap 7 D7Port G6 TxIN 27 ― ― Tap 7 D6 Tap 7 D8Port G7 TxIN 5 ― ― Tap 7 D7 Tap 7 D9Port H0 TxIN 7 ― ― Tap 8 D0 Tap 8 D2Port H1 TxIN 8 ― ― Tap 8 D1 Tap 8 D3Port H2 TxIN 9 ― ― Tap 8 D2 Tap 8 D4Port H3 TxIN 12 ― ― Tap 8 D3 Tap 8 D5Port H4 TxIN 13 ― ― Tap 8 D4 Tap 8 D6Port H5 TxIN 14 ― ― Tap 8 D5 Tap 8 D7Port H6 TxIN 10 ― ― Tap 8 D6 Tap 8 D8Port H7 TxIN 11 ― ― Tap 8 D7 Tap 8 D9(Port I5) TxIN 15 ― ― ― Tap 3 D1(Port I6) TxIN 18 ― ― ― Tap 4 D0(Port I7) TxIN 19 ― ― ― Tap 4 D1(Port K0) TxIN 20 ― ― ― Tap 5 D0(Port K1) TxIN 21 ― ― ― Tap 5 D1(Port K2) TxIN 22 ― ― ― Tap 6 D0(Port K3) TxIN 16 ― ― ― Tap 6 D1(Port K4) TxIN 17 ― ― ― Tap 7 D0- TxIN 24 ― ― LVAL LVAL(Port K5) TxIN 25 ― ― FVAL Tap 7 D1(Port K6) TxIN 26 ― ― DVAL Tap 8 D0(Port K7) TxIN 23 ― ― Exposure Active Tap 8 D1DigitalI/O-2(2/2)SP-20000M/C-PMCLPort Camera Link ConfigurationCamera Link port/bitGenICam Tap Geometry |
Related manuals for JAI SP-20000C-PMCL
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine