SP-20000M-PMCL / SP-20000C-PMCL- 61 -7.6 Trigger width modeIn this mode, the exposure time is equal to the trigger pulse width. Accordingly, longerexposure times are supported. Additional settings determine if the trigger pulse can beaccepted during the exposure period.Basic settings to use this modeTrigger Mode = ONExpsoure Mode = Trigger WidthTable - 41 Minimum trigger interval (Trigger Overlap = Readout)Readout ModeTime (Min. Trigger Period)1x8 – 1Y 1x4 – 1Y 1X2 – 1Y80 MHz 60 MHz 80 MHz 60 MHz 80 MHz 60 MHzFull ≧31.761 ms ≧42.648 ms ≧63.200 ms ≧84.864 ms ≧126.389 ms ≧169.719 msROI Center 2/3 ≧21.287 ms ≧28.582 ms ≧42.252 ms ≧56.734 ms ≧84.492 ms ≧113.457 msROI Center 1/2 ≧16.050 ms ≧21.550 ms ≧31.777 ms ≧42.669 ms ≧63.544 ms ≧85.327 msROI Center 1/4 ≧8.195 ms ≧11.001 ms ≧16.066 ms ≧21.571 ms ≧32.121 ms ≧43.131 msROI Center 1/8 ≧4.267 ms ≧5.726 ms ≧8.211 ms ≧11.022 ms ≧16.410 ms ≧22.033 msV Binning ON (Full)(Note1) ≧31.770 ms ≧42.658 ms ≧63.216 ms ≧84.887 ms ≧126.423 ms ≧169.764 msNote1： SP-20000M-PMCL onlyNote2： If Trigger Overlap is OFF, the accumulation time is added to the above table.
