Authentics L8Operation102. use the device’s Bluetooth pairing menu to pairit with the JBl authentics l8. the system willappear as JBL L8 BT in the list of Bluetoothavailable devices. when the system’s Bluetoothindicator led illuminates constantly, it is pairedwith the device and you can stream audio viaBluetooth from the device to the system.to listen to audio from the Bluetooth device, press the sourcebutton on the system to switch to the Bluetooth source. aslong as the device has already been paired with the system,you can automatically wake the system up from standbymode by starting to stream an audio Bluetooth signal to it.JBL L8 BTJBL L8 BTto disconnect the Bluetooth device, press and hold the sourcebutton until the led begins flashing.NOTE:• You can switch sources to the paired Bluetoothdevice by pressing the Source button.• If you switch the system to a different sourcewhile a paired Bluetooth device is streamingto the system, the system will send a STOP orPAUSE command, and the Bluetooth device willstop streaming.• While pairing the Bluetooth device for the firsttime, it may reset the volume level to the default.Operating through NFCthe JBl authentics l8 audio system supports nFc forBluetooth auto-pairing.the system has an nFc area on the top panel. to connectthrough nFc, first disconnect any other sources and switch tothe Bluetooth source. Make sure your mobile phone has nFcturned on and the screen is unlocked, then tap the phone tothe nFc area on the top panel of the JBl authentics l8. Ifthere is a pop-up on your phone asking if you want to pair withthe device, select Yes and the mobile device will automaticallyconnect to the JBl authentics l8.the system name for nFc connection is JBL L8 BT. If thesystem is in standby or sleep mode, the system enters intothe Operational mode upon tapping with a mobile phone.JBL L8PAIRYES NOOperating through Apple AirPlay®If you have connected your JBl authentics l8 to your homenetwork, you can stream audio to it via airplay ® from acompatible iphone, ipod touch, or ipad with iOs version 4.2or higher, and computers with itunes 10.1 or higher that areconnected to the same network.