JBL Authentics L8 Owner's Manual

Also see for Authentics L8: Quick start guide Owner's manual Quick start guide

Contents

JBL Authentics L8 Owner's Manual Manual pdf 11 page image

Operation11authentics l8to initiate airplay streaming from a computer with itunes,1. launch iTunes.1. click the AirPlay button that appears atthe bottom of the iTunes window.2. select JBL_L8_WF_XXXXXX in the pop-uplist, where xxxxxx is the last six charactersof the system’s Mac address.to initiate airplay streaming from an ipod, iphone, or ipaddevice,1. tap the AirPlay button on the device’s screen.2. select JBL_L8_WF_XXXXXX in thespeaker selection drop-down list.the airplay audio stream will break in and stop the currentlyplaying source. If the system is in sleep mode, it will turn onand begin playing the airplay audio stream.you can change the display name of your JBl authentics l8using the JBl Music app or the JBl authentics setup page.Operating through DLNA®you can use dlna® compliant software to stream audio toyour JBl authentics l8 from a pc or android device that isconnected to the same network. to operate through dlna,from the media player software, select audio to play backon the JBL_L8_WF_XXXXXX, where xxxxxx is the last sixcharacters of the system’s Mac address. the dlna audiostream will break in and stop the currently playing source. Ifthe system is in sleep mode, it will turn On and begin playingthe dlna audio stream. check your media player softwaredocumentation for more details.the JBl authentics l8 is a dlna digital Media renderer(dMr) device. your media player software must be capableof acting as a dlna digital Media server (dMs) and digitalMedia controller (dMc) to initiate the audio stream. thirdparty dlna software can be found online, or on google playfor android devices. compatible software can also be foundon the apple app store for a Mac or iOs device.the JBl authentics l8 is capable of playing Mp3, wMa, aac,or pcM audio files via dlna.Operating through Aux Inputto play music through aux input in the system:1. connect the auxiliary device to the aux in jackusing a stereo 3.5 mm (1/8” auxiliary cable).2. switch to the aux input source.3. control music playback through the auxiliary device.AUX INWPSiPadOperating through Digital Optical Inputthe digital optical input port in the system allows the systemto play raw pcM at a sample rate of 44.1 khz or 48 khz. If anyaudio signal is available in the digital optical input, the systemdetects the signal and starts playing music.ON / OFFPOWEROPTICALWeb Page Functionsyou can access the web page to change wi-Fi settings orupgrade the device firmware. you can access the web pageby typing its Ip address into your browser on your Mac or pc.to find the Ip address, access your router’s setup page. Formore information, consult the documentation of your router.