JBL Cinema BD100 Owner's Manual

Contents

12connecTing The fM AnTennAConnect the supplied antenna to the FM Antenna connector, as shown inthe illustration below. Fully extend the antenna wire and move it to differentpositions until you get the best reception for your favorite stations.FM Antenna(supplied)connecTing A TV or Video diSplAyUse an HDMI cable (not supplied) to connect the receiver’s HDMI output toyour TV/video display’s HDMI input.NOTE: If you have devices (such as an Internet modem) already connecteddirectly to your TV, you can feed their sound to the receiver via the HDMIMonitor Out connector’s Audio Return Channel, and they will not requireadditional connections to the receiver.HDMI Cable(not supplied)TvCompositevideo Cable(not supplied)Use thisconnection ifyour Tv doesnot have anHDMI connectorUse thisconnectionif your Tvhas an HDMIconnectorNOTE: The HDMI connection will deliver both video and audio to your TVor video display. We suggest disabling your TV or video display’s audiosystem to take full advantage of your Cinema BD system’s superior audioreproduction.connecTing your hdMi Source deViceS (Bd300 only)If you have any source devices with HDMI connectors, using them willprovide the best possible video and audio performance quality. Since theHDMI cable carries both digital video and digital audio signals, you do nothave to make any additional audio connections for devices you connect viaan HDMI cable.HDMI-Equipped Source DeviceTo HDMIoutputHDMI Cable(not supplied)connecTing your opTicAl digiTAl Audio Source deViceSIf one of your non-HDMI source devices has a optical digital output,connect it to the receiver’s Optical Digital Input connector. NOTE: Make onlyone type of digital connection (HDMI, optical or coaxial) from each device.To optical DigitalAudio outputoptical Digital AudioCable (not supplied)optical-Equipped Source DeviceRemove Caps