JBL Cinema BD100 Owner's Manual

Contents

21www.jbl.comEnglishSurround-Sound ModeSYour receiver can decode and play audio programs in these native audioformats:• Dolby Digital• Dolby Digital Plus• Dolby TrueHD• DTS Digital• PCM• MP3: 32kbps – 320kbps bitrates, including variable bitrate encodingThe audio formats available for any particular program depend on theprogram: AVAilABle Audio forMATS2.0- and 2.1-channel Setupconfiguration3.1-channelSetupconfiguration5.1-channelSetupconfiguration2.1-channelprogramsDolby VirtualSpeaker Wide(default)/Dolby VirtualSpeaker Reference/StereoOriginal (default)/Dolby PLII Movie/Dolby PLII Music/Dolby VirtualSpeaker Wide/Dolby VirtualSpeaker Reference/StereoOriginal (default)/Dolby PLII Movie/Dolby PLII Music/Dolby VirtualSpeaker Wide/Dolby VirtualSpeakerReference/Stereo3.1-channelprogramsDolby VirtualSpeaker Wide(default)/Dolby VirtualSpeaker Reference/StereoOriginal (default)/Dolby VirtualSpeaker Wide/Dolby VirtualSpeaker Reference/StereoOriginal (default)/Dolby PLII Movie/Dolby PLII Music/Dolby VirtualSpeaker Wide/Dolby VirtualSpeakerReference/Stereo4.1-/5.1-/6.1-channelprogramsDolby VirtualSpeaker Wide(default)/Dolby VirtualSpeaker Reference/StereoDolby VirtualSpeaker Wide(default)/Dolby VirtualSpeaker Reference/StereoOriginal (default)/Dolby VirtualSpeaker Wide/Dolby VirtualSpeakerReference/StereoTo switch among the available surround-sound modes for the programcurrently playing, press the Surround button. Each press of the Surroundbutton will change to the next available mode in line. A pop-up display willappear on the TV, showing the modes as you cycle through them.using The DisC playeRdiSc-hAndling precAuTionS• To keep the disc clean, handle the disc by its edge. Do not touch thesurface.• Do not stick paper or tape on the disc. If there is glue (or a similarsubstance) on the disc, remove the substance completely before usingthe disc.• Do not expose the disc to direct sunlight or heat sources such as hot-airducts or leave it in a car parked in direct sunlight, as there can be aconsiderable rise in temperature inside the car.• After playing, store the disc in its case.• Do not write on the label side with a ball-point pen or other sharp writingutensils.• Be careful not to drop or bend the disc.diSc-cleAning precAuTionS• Before playing, clean the disc with a cleaning cloth. Wipe the disc from thecenter out.• Do not use solvents such as benzene, thinner, commercially availablecleaners or anti-static spray intended for vinyl LPs.regionAl codingYour BD receiver is designed to be compatible with region-managementinformation that is encoded on most Blu-ray Disc recordings and DVDrecordings. If there is a region code on a disc other than the one yourreceiver is designed for, it will not play in your BD receiver.See the sidebar box on page 2 for complete information about yourreceiver’s region coding.copyrighTAudio-visual material may consist of copyrighted works that must not berecorded without the permission of the owner of the copyright. Please referto relevant laws covering copyright protection.copy proTecTionYour BD receiver is in compliance with HDCP (High-Definition CopyProtection), and a video display connected via the HDMI Monitor Outconnector must also be HDCP-compliant.The BD receiver supports Rovi™ copy protection. On Blu-ray Discrecordings and DVD discs that include a copy-protection code, if thecontents of the disc are copied using a VCR, the copy-protection codeprevents a videotape copy from playing normally.SupporTed diSc forMATSThe BD receiver can play the following types of discs (5"/12cm and 3"/8cmsize):• BD-Video (single-layer or double-layer)• DVD-Video• DVD+R/+RW• DVD-R/-RW• CDDA (CD digital audio)• CD-R/RWNOTE: The compatibility and performance of dual-layer discs is notguaranteed.