JBL Control Control Now Owner's Manual

Contents

JBL Control Control Now Owner's Manual Manual pdf 14 page image

3/4-ROUND WALL-MOUNTINGCAUTIONThe customer is responsible for proper selection and use of mounting hardware(available through hardware stores), to properly and safely wall-mount thespeakers. The JBL Control NOW speaker was designed to be easily installed.However, if you are unable to clearly and fully understand and follow theinstructions in this manual, or if you are unsure of your ability to properly installthese loudspeakers, please contact your dealer or a qualified installer. Pleasedo not use any power tools during installation. Power tools can exert excessiveand unnecessary torque which, in turn, can damage fasteners or other partsand accessories, reducing their strength and causing possible failure of thefastener or part. A failed or damaged fastener or part may not be able toperform as designed, and may lead to an unsafe installation.1. Secure three corner/wall-mounting brackets together by using four#10-32 x 1/2" (M5 13 mm) screws provided as shown.#10-32 x 1/2" (M5 13 mm)Screws (2)#10-32 x 1/2" (M5 13 mm)Screws (2)When deciding upon a location for the JBL Control NOW speaker, take careNOT to install the mounting bracket closer than 3" (7,6 cm) to the ceiling. Anycloser than 3" (7,6 cm) will not allow the room needed to position and slide theJBL Control NOW speaker into the mounting bracket.ceiling3" (7,5 cm) Minimumdistance from ceilingto top of bracket(horizontal mounting)2. Attach the mounting bracket to the wall. Be sure to use appropriate anchors.Appropriateanchors3. Remove the terminal assemblies from the rear of all speakers. The terminalassembly is removed by giving it a slight counterclockwise rotation. Use thetransparent plastic strap to pull the assembly out, as shown.14Speaker 1Speaker 2 Speaker 3