Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISHRevision: A Page 3 of 6Harman Multimedia ConfidentialStep 1 Connecting the speaker system to the computer:• If you have an integrated sound solution or a stereo sound card; connect the green connector from the subwoofer intothe green jack on the computer.• If you have a multi-channel sound card; connect the green connector from the subwoofer into the green jack on thecomputer.• If you have a portable computer; connect the green connector from the subwoofer into the headphone jack on thecomputer.Step 2 Plug the orange connector from the right/control satellite into the orange jack on the subwoofer.Step 3 Plug the brown connector from the left satellite into the brown jack on the subwoofer.Step 4 Plug the AC power supply jack into the subwoofer.Step 5 Plug the AC plug into the wall outlet.Step 6 Turn on the speaker set and adjust the volume accordingly.Placement of speakersThe speakers are magnetically shielded and can be placed close to a computer monitor without distorting the image. Foroptimal stereo imaging, separate the speakers from each other by a distance equal to your distance from the speakers.The subwoofer’s sound is non-directional; therefore, it does not have to be placed in any particular relationship to the satellites.The subwoofer is magnetically shielded and can be placed on the desktop, if desired. If the subwoofer is placed too close to acomputer monitor it can cause vibration on the monitor screen.