JBL EON 210P User Manual

Also see for EON210P: User guide Specifications User guide

Contents

13STEREO OUTPUTS: We’ve brought signals into the mixer now let’s sendthem somewhere…The EON 210P has 3 stereo pairs of outputs:1. LEFT/RIGHT speaker outputs - These outputs should only beconnected to the EON 210P speakers and under no conditionshould they be connected to the input of another electronic device.These outputs carry power and as such could damage the electronicdevice. Only use “unshielded” speaker cables (like the cablesprovided with your EON 210P).2. “MONITOR OUTPUTS”These outputs allow you to route the stereo mixer signal to anotherdestination like a recording device, personal monitor, subwooferor to another PA system (Front of House). Depending on the inputconnectors of the destination device, you can use either the ¼" phonejacks or the RCA jacks.a. “MONITOR OUTPUT VOLUME”This controls the overall volume of the MONITOR OUTPUT.3. HEADPHONE OUTPUTThis output allows the user to listen to the main output the EON 210P mixer.Headphones used will require a 3.5 mm stereo plug.MASTER VOLUME and “PEAK LED LADDER”Your EON 210P is equipped with a “Master Volume” that controls the overalloutput volume of the system and a 5 light “Peak LED Ladder” that gives youa visual display of how much power you are using (think of the speedometeron your car). The red or top LED on the ladder indicates that you are approachingthe maximum output by blinking or, when it stays on constantly, indicates youhave reached the maximum output. As a frame of reference if a channel volumeis on “7” and the “MASTER VOLUME” is on “7” you will have reached themaximum output before distortion is audible.October 5th, 2010lscons