JBL EON 210P User Manual

Also see for EON210P: User guide Specifications User guide

Contents

156. CONNECTING A MICROPHONE:a. Turn the “MASTER VOLUME” to “0”.b. Connect the microphone to the microphone cable and insert the male end intochannel 1 of the EON 210P mixer.c. Depress the MIC/LINE switch – this increases the sensitivity of the input and isset for use with a dynamic microphone.d. Set the “TREBLE” and the “BASS” control to “0” (IN THE CENTER AT THE DETENT).e. Set the “REVERB” to “0”.f. While talking loudly into the microphone bring up the channel volume untilthe red “PEAK” indicator blinks quickly. If the indicator does not come on at alland you have turned the channel volume to “10”, then reduce the channelvolume to “7” and move on to the next step. If the “PEAK” indicator comeson at “3” for instance, then press the MIC/LINE switch returning it to the “up”position and increase the channel volume control.g. Slowly bring up the “MASTER VOLUME”to the desired loudness.* If you are using a “condenser microphone”engage the PHANTOM POWER button.7. CONNECTING A KEYBOARD, DRUM MACHINE, CD OR MP3 PLAYER TO THE 5/6 STEREO INPUT:a. Turn down both the “Volume” control on channel “5/6” and the “MASTER VOLUME” control.b. Connect the output of the device to the “5/6” input of the EON 210P mixer using theappropriate input jacks. (1/4" phone or RCA depending on the output of the device you are trying to connect)c. If there is an output gain or volume control on the device, set that to “7”. This level is a startingpoint but should get you enough output to drive the input of the EON 210P.d. Bring up the “5/6 VOLUME CONTROL” to the 5-7 range.e. Slowly bring up the MASTER VOLUME to the desired loudness.8. CONNECTING A PERSONAL MUSIC PLAYER TO THE 7/8 STEREO INPUT:a. Turn down the “MASTER VOLUME” control.b. Connect the output of the device to the “7/8” input of the EON 210P mixer using a 3.5 mmstereo “mini plug”.c. If there is an output gain or volume control on the device, set that to “7”. This level is a startingpoint but should get you enough output to drive the input of the EON 210P.d. Slowly bring up the MASTER VOLUME to the desired loudness.9. USING THE MONITOR OUTPUTS: You can connect these outputs to a variety of devices like arecording device, a powered sub-woofer, additional power amplifier and speakers or evenanother mixer.a. Turn the “MONITOR OUTPUT VOLUME” control to “1”.b. Connect the MONITOR OUTPUTS (EITHER THE ¼” PHONE OR RCA) to the inputs of thedevice into which you want to plug the mixer.c. Set the input level of the external device according to the manufacturer instructions.d. Slowly bring up the “MONITOR OUTPUT VOLUME” to the desired loudness.cdefgba