JBL EVOi.sys User Manual

Also see for EVOi.net: User guide

Contents

INPUT CHANNEL(continued)PANThe PAN control sets the amount of the channel signal feed-ing the Mix L and R or Sub L and R busses (see SUB andMIX on the next page), allowing you to move the sourcesmoothly across the stereo image. When the control is turnedfully right or left you are able to route the signal at unity gainto either left or right outputs individually. A mono sum of thepost-fader channel signal is also fed to the Mono output,unaffected by the position of the PAN control.MUTEAll outputs from the channel except inserts and pre-fadedirect outputs are active when the MUTE switch is releasedand muted when the switch is down, allowing levels to be pre-set before the signal is required.SUBPressing SUB routes the channel signal to Sub L and R busses.The channel signal will be fed proportionately to left or rightdepending on the position of the PAN control.MIXPressing MIX routes the channel signal to Mix L and R busses.The channel signal will be fed proportionately to left or rightdepending on the position of the PAN control.11109812M I X E R O P E R A T I O NPhantom Power(Master Section)Wiring XLRsUnbalanced InputBalanced InputWiring PlugsUnbalanced InputBalanced InputInsert315142178101112135649INPUTCHANNELINPUTS(Rear Panel)