JBL Marine MR-18.3 Operation Manual

Contents

¦ÌQuick Reference Guide for Sirius131. To Access Satellite Radio (perform one of the following)- Press MODE button until SIRIUS appears on the LCD.- While in any mode other than SIRIUS, simply press SH.SR to enter SIRIUS mode.2. For Direct Channel EntryWhile in SIRIUS mode, press MODE button for over 1.5 seconds to enter Direct Mode. At thatpoint, the display will show "Channel_ _ _". Simply enter the desired number to go directly tothe channel (example: 123).3. To Access SIRIUS ID numberIn SIRIUS mode, press MODE button for over 1.5 seconds, "Channel_ _ _" will display on LCD,enter "000" to display your SIRIUS ID number. "SID" followed by 12 digits will appear on theLCD. Or simply navigate to channel "000" using the TUNE knob (15).4. To Enter Category ModeWhile in SIRIUS mode, press BD/FN button for over 1.5 seconds to enter Category mode.The Category icon will appear on the LCD. Momentarily rotate Tune up/down button to switchbetween category channel. To change categories, rotate and hold Tune up/down button for 1.5seconds. To return to Direct mode, press and hold BD/FN button until the display says DIRECT.5. To Preset Channels (up to 20 presets):You can save up to 20 channels in the memory for direct mode and up to 10 channels incategory mode. There are two possible ways to preset:- Press MODE button for over 1.5 seconds until "Channel_ _ _" displays on LCD. Then usethe numeral key to directly enter what ever channel you would like to store (example:104).Press the preset button where you would like to store the channel for over 1.5 seconds tosave it to memory.2. Use TUNE UP/DN button to find a channel you would like to store. Press the preset buttonwhere you would like to store the channel for over 1.5 seconds to save it to memory.6. To Display Song Title or ArtistIn SIRIUS mode, press and hold SH.SR button for 1.5 seconds to switch between song title,artist and composer on the display.7. For Parental Lock Out Programming- In SIRIUS mode, select the channel that you want to lock out. Press SH.SR to show SHIFTicon, then simply press numeral 5 button. It has been locked when "Locked Channel" appearson the display.- To temporarily unlock a channel, manually tune to the channel. When prompted, the displaywill read CHANNEL LOCKED, then it will display CODE. Enter your password and the channelwill be unlocked until you change to another channel.- To permanently unlock a channel, after temporarily unlocking the channel press SH.SRbutton to show SHIFT icon on LCD, then simply press numeral 5 button. Then enter yourpassword again, the channel becomes totally unlocked when "LOCK RELEASE" displays.8. To Change the Password (CODE)In SIRIUS mode, press and hold SEL button, then momentarily press SEL repeatedly untilCODE displays on LCD. Enter your current password first, once you see NEW CODE displays,enter your new 4-digit password. Now display will show UPDATE which means the systemaccepted your new password.Note: If power is completely removed from stereo, the password will revert back to 0000.