JBL Marine MR-18.3 Operation Manual
        | |
6 71. POWER ON/OFF, MUTE button (1)Press PWR button (1) to turn the unit on. Press and hold it for over 3 seconds to turnthe unit off. To mute audio, quickly press the MUTE (1) button; press the button againto restore audio.2. SELECT button (3)1) Audio control ( VOLUME / BASS / TREBLE / BALANCE / FADER )Press key quickly to select the following features:"VOL" display - volume control > press key (3)>"BAS" display - bass tone control >press key (3)>Turn spindle knob left to lower bass, turn right to increase bass."TRB" display - treble tone control > press key (3)>Turn spindle knob left to lower treble, turn right to increase treble."BAL" display - balance control > press key (3)>Turn spindle knob left to decrease right speaker volume.Turn right to increase left speaker volume."FAD" display - fader control > press key (3)>Turn spindle knob left to decrease the volume level of any speakersconnected to the front channel.Turn right to decrease the volume level of any speakers connectedto the rear channel.If another selection or adjustment is not made within 5 seconds, the radio automaticallyswitches into volume control mode.These settings are indicated on the display window.2) Beep 2nd , I-Vol , Area and DSP SelectionWhen the SEL button (3) is pressed over 2 seconds, the unit will be operated as below:VOLUME Select BASS Select TREBLESelect FADER Select BALANCE SelectControlsa. Beep 2ndOn the beep 2nd, you can control the Beep on or Beep 2nd by turning the spindle knob.- Beep on: You can hear beep sound when you press all buttons.- Beep 2nd: You can hear beep sound when you press the button over 1.5 seconds.b. I-VOLBy pressing the SEL button again, the unit will display in I-VOL (Initial Volume LevelAdjustment). You can adjust the I-Vol to the setting you want by turning the spindleknob. This feature control the max volume level desired upon powering the radio on.c. Area SelectionBy pressing SEL button again, the unit will be in Area Selection mode. Use thespindle knob to choose USA or EUR (Europe). Press and hold the BAND button for1-2 seconds to accept the desired setting.d. DSPChoose from flat, classic, pop or rock by pressing the SEL button again. Adjust withspindle knob and wait approximately 5 seconds for the setting to be accepted; thenthe radio will automatically return to normal operation.e. CODESee page 13 section 8 “To Change the Password”.3.Volume controlTurn the spindle knob (2) left or right to decrease or increase the volume level.The radio will automatically default to volume mode when powered up.4."MODE" button (4)Press this button to select Radio CD SIRIUS AUX-IN.5. SHIFT / SCROLL ( SH.SR) button (5)SIRIUS function button only.6. BD.FN button (6)Pressing the BD.FN button will shift FM/AM bands in radio mode as:FM1 FM2 FM3 AM1 AM2.And in Sirius mode, press BD.FN will shift between SSR1 and SSR2.7. Loudness function (13)In order to emphasize the bass and the treble at low volume, press the LOUD (13)button. To turn off loudness press the LOUD button again. If in Sirius mode, first pressSH.SR (5) button; then press the LOUD (13) button.Controls124 53 6113141715187 8 9 10 11 162MARINE19MUTEMUTEBeep 2nd I-Vol Area(FM/AM only)Press Press Press DSP PressCODE(Sirius only) |
Related manuals for JBL Marine MR-18.3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine