JBL PRX ONE Mounting Instructions

Also see for PRX ONE: User guide

M6Nut LockWasher FlatWasherFlatWasherLockWasherM6L36ABPRX ONE-Install Adapter Bracket Kit Assembly & Bracket Installation Guide – Page 5PIVOT BOLT LOCATION6) SLIDE ARRAY WITH ARRAY BRACKET ONTO WALL BRACKET1 Once the wall mount has been attached to the wall and Array mount has been attachedto the Array, loosely install the M6-L36 PIVOT BOLT (bolt, lock washer and flat washer onone side and flat washer, lock washer & nut on the other side) of the WALL BRACKET. Thenslide the Array so that the ARRAY BRACKET engages into the WALL BRACKET,dropping the hook slot of the ARRAY BRACKET onto the PIVOT BOLT as shown in Drawing1.2 Insert the top tilt-angle bolt through the appropriate hole – first insert screw suit A throughthe slot for continuous adjustment capability,then insert the screw suit B through one of thepreset angle holes (see next page for more information about tilt angles).Install with M6-L36 bolt, lock washer and flat washer on one side and flat washer, lock washer &nut on the other side, as shown in Drawing 2 . Make sure the bolt goes through holes in WALLBRACKET and in ARRAY BRACKET.3 Final BRACKET ASSEMBLY is shown in Drawing 3 .TIGHTEN THE BOLTS.1 2 3

/ 8

Related manuals for JBL PRX ONE