JBL Soundzone SMS1 Owner's Manual

Also see for Soundzone SMS1: Technical manual

Contents

Components and PartsPlease take a moment to familiarize yourself with all of the parts.This will help you as you progress through the manual, and as you set up the system.SMS1-SystemFigure 1 – SMS1 System Components1 - SMS1-SUB - This is the Subwoofer Module. It houses the Low Frequency Loudspeaker, one 120Watt amplifier for the Subwoofer, two 20 Watt amplifiers for the Satellites, and the SoundzoneElectronics. Please see Figure 2 for more detail on the Subwoofer Module.2 - SMS1-SAT – There are four Satellites in a complete system. These are the loudspeakers for all of themiddle and higher frequencies.3 - InvisiBall – There are four of these in a complete system. They are the only hardware you need forinstalling the SMS1 -SAT’s on a solid surface.4 - Hex Key Wrench - This INCLUDED 3mm Hex Wrench is used for loosening and tightening theInvisiBall mechanism in the SMS1-SAT’s.5 - Wrench – This INCLUDED Wrench is for tightening the InvisiBall Arm onto the base.6 - Block Connectors – These Block Connectors are provided for making all input and output connectionsfrom the Connector Panel.7 - Security Panel – Covers the tuning controls after setup to prevent tampering.8 - Power Cord – This cord attaches to the IEC Power Input Jack on the Electronics module and connectsto an AC Power Outlet for supplying power to the module.9 - Subwoofer Feet – There are two feet in a complete system. They are required if the Subwoofer is tobe set on a floor or shelf.3