1.0BASICOPERATIONS1.2.2 Adjusting the Master VolumeThe Master Volume buttons at the top right hand part ofthe Remote Controller are used to adjust the OutputLevels of the system. Press the s button to make thingsLouder, and the tbutton to make things Softer. Thesedo not adjust the Input Levels of the Source Devices. Infact, we recommend that you do not do so. They havebeen set and calibrated to mesh flawlessly with thesystem, and adjusting them directly — either throughthe dials on their front panels or via their own separateSource Remote Controllers, can throw the system out ofbalance.NOTE: If, over time, you notice that one Source Deviceconsistently sounds Too Loud or Too Soft, call yourCertified Dealer. He or she will adjust the levels andre–set the new levels as your “Reference Levels” towhich you can return if the system’s sound goes awry.1.3 Basic Cinema Operations1.3.1 Adjusting the Cinema VolumeTo adjust the Volume in Cinema Mode, make sure thatthe Video is powered up and that it has been selected asthe source. Then simply adjust the volume s or tusing the MASTER VOLUME buttons.5