JBL VTX Series Rigging Manual
Also see for VTX Series: User manualUser manualRigging manualWiring guideUser manual
                                                        | |
Contents
| 
18VTX B 18 | Rigging ManualSTEPS:• Remove the 4 x M6 HEX screws holding the grill onto the B18• Carefully disconnect the MolexTM connector which is used to connect the 2 front NL4 connectors to the B18• Remove the 4 x Phillips screws holding each bracket, reverse the orientation of the brackets and reinstall the Phillips screws• Reconnect the MolexTM connector and secure the grill12TOOLS REQUIRED: A 4mm HEX key is required to remove the four M6 screws holding the grill on the B18. A Phillips#2 screwdriver is required for removing the four Phillips screws holding the bracket.7.1 - ROTATING THE DOLLY TABS - FOR USE WITH THE ACC DOLLYThere are two dolly tabs available at the front of the B18 that are used to secure the front face ACC dolly board to the B18. The tabs areretractable and ship from the factory oriented towards the inside of the B18. This orientation is ideal when the B18s are used with thevertical transport cart in which case the tabs are not needed. When the B18 is used with front face dolly boards the tabs are rotated sothat the dolly board can be attached to the subwoofer.3412 |
Related manuals for JBL VTX Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine