JETWAY 601CFR4A User Manual
Also see for 601CF: Manual
                                              | |
Contents
| 
31into each of the sub menu that follows this field (a sub menu is preceded by a “>”).The settings are: Auto (ESCD), Manual.IRQ ResourcesWhen resources are controlled manually, assign each system interrupt a type,depending on the type of device using the interrupt.PCI/VGA Palette SnoopLeave this field at Disabled. The settings are Enabled, Disabled.3-10 PC Health StatusThis section shows the Status of you CPU, Fan, Warning for overall system status.This is only available if there is Hardware Monitor onboard.CMOS Setup Utility – Copyright(C) 1984-2001 Award SoftwarePC Health StatusItem HelpShow PC Health in Post [Enabled]Vcore 1.91V2.5V 2.50V3.3V 3.40V5V 5.10V12V 11.95VCurrent CPU Temp. 33°C/91°FCurrent System Temp. 21°C/69°FCurrent FAN1 Speed 5100 RPMCurrent CPUFAN2 Speed 0Menu Level >:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsShow PC Health in PostDuring Enabled, it displays information list below. The choice is either Enabled orDisabledCurrent CPU Temperature/Current System Temp/Current FAN1,FAN2 Speed/Vcore/Vtt/Vcc3.3/+5V/+12V/-12V/-5V (V)This will show the CPU/FAN/System voltage chart and FAN Speed.3-11 Miscellaneous ControlThis section is for setting CPU Frequency Control.CMOS Setup Utility – Copyright(C) 1984-2001 Award SoftwareMiscellaneous Control |
Related manuals for JETWAY 601CF
manualsdatabase
Your AI-powered manual search engine