JETWAY 601CFR4A User Manual

Also see for 601CF: Manual

JETWAY 601CFR4A User Manual Manual pdf 35 page image

32Item HelpCyrixIII Clock Ratio DefaultAuto Detect DIMM/PCI Clock EnabledSpread Spectrum Disabled** Current Host Clock is 66MHz **Host Clock at Next Boot is [66MHz/33MHz]** Current DRAM Clock is 66Mhz **DRAM Clock at Next Boot is [66]MHzMenu Level >:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsAuto Detect DIMM/PCI ClockThis item allows you to enable/disable auto detect DIMM/PCI Clock.The settings are: Enabled, Disabled.Spread SpectrumThis item allows you to set the CPU Host/PCI clock Spread Spectrum.The choice are: Disabled and Enabled.Host Clock at Next Boot isThis item allows you to step by step setting CPU/HOST Frequency, USE PageDown/ PageUpkey user can change the frequency to approach overclocking.DRAM Clock at Next Boot isThis item allows you to select SDRAM Frequency to add or to decrease.3-12 Load Standard/Optimized DefaultsLoad Standard DefaultsWhen you press on this item, you get confirmation dialog box with a message similarto:Load Standard Defaults (Y/N)? NPressing loads the BIOS default values for the most stable, minimal-performance systemoperations.Load Optimized DefaultsWhen you press on this item, you get a confirmation dialog box with a messagesimilar to:Load Optimized Defaults (Y/N)? NPressing loads the default values that are factory settings for optimal performance systemoperations.3-13 Set Supervisor/User PasswordYou can set either supervisor or user password, or both of them. The differences are:Supervisor password: Can enter and change the options of the setup menus.User password: Can only enter but do not have the right to change the options