12* These IRQs are usually available for ISA or PCI devices.2-5-3 Interrupt Request Table For This MotherboardInterrupt request are shared as shown the table below:INT A INT B INT C INT D INT E INT F INT G INT HSlot 1 √Slot 2 √Slot 3 √Slot 4 √Slot 5 √Slot 6 √Onboard VGAOnboard USB 1 √Onboard USB 2 √AC97/MC97 √IMPORTANT! If using PCI cards on shared slots, make sure that the drivers support“Shared IRQ” or that the cards don’t need IRQ assignments. Conflictswill arise between the two PCI groups that will make the systemunstable or cards inoperable.2-5-4 AGP SlotThis motherboard provides an AGP Slot, only support the 1.5V 4X AGP VGA card.Do not use AGP 2X card (3.3V) in this motherboard. It will burn and damage themotherboard due to Intel® 845 chipset can not support AGP 2X (3.3V).IMPORTANT! Before you plug-in AGP card, please make sure the following noticeis fully understood and practiced. If your AGP card has “AGP 4Xnotch (show below) please make sure your AGP card is AGP 4X(1.5V) not AGP 2X (3.3V)AGP SLOT2x notch 4x notch
