JETWAY 866ASUR2A User Manual
Also see for 866AS ULTRA RAID: Bios guideUser manual
                                                        | |
Contents
| 
12CPU ZIF Socket-AColden ArrowSocket-AAMDWhen you put the CPU into the ZIF socket. No force require to insert of the CPU, thenpress the level to Locate position slightly without any extra force.2-4 Install MemoryThis motherboard provides three 184-pin DUAL INLINE MEMORY MODULES (DIMM)sites for memory expansion available from minimum memory size of 64MB to maximummemory size of 3.0GB DDR SDRAM.Valid Memory ConfigurationsBank 184-Pin DIMM Total MemoryBank 0, 1 (DDR1) PC1600/PC2100 DDR SDRAM X1 64MB∼1.0GBBank 2, 3 (DDR2) PC1600/PC2100 DDR SDRAM X1 64MB∼1.0GBBank 4, 5 (DDR3) PC1600/PC2100 DDR SDRAM X1 64MB∼1.0GBTotal System Memory (Max. 3.0GB) 3 64MB∼3.0GBNOTE! Make sure the total installed memory does not exceeds 3.0GB, otherwise thesystem may hang during startup.Generally, installing DDR SDRAM modules to your motherboard is very easy, you canrefer to figure 2-4 to see what a 184-Pin PC1600/PC2100 DDR SDRAM module looks like.DDR2 (BANK2+BANK3)DDR1 (BANK0+BANK1)DDR3 (BANK4+BANK5)NOTE! When you install DIMM module fully into the DIMM socket the eject tab should belocked into the DIMM module very firmly and fit into its indention on both sides.Figure 2-4 |
Related manuals for JETWAY 866AS ULTRA RAID
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine