JETWAY 866ASUR2A User Manual
Also see for 866AS ULTRA RAID: Bios guideUser manual
                                                        | |
Contents
| 
37Reset Configuration DataNormally, you leave this field Disabled. Select Enabled to reset Extended System ConfigurationData (ESCD) when you exit Setup if you have installed a new add-on and the systemreconfiguration has caused such a serious conflict that the operating system can not boot.The settings are: Enabled and Disabled.Resource Controlled ByThe Award Plug and Play BIOS has the capacity to automatically configure all of the bootand Plug and Play compatible devices. However, this capability means absolutely nothingunless you are using a Plug and Play operating system such as Windows95/98. If you setthis field to “manual” choose specific resources by going into each of the sub menu thatfollows this field (a sub menu is preceded by a “>”).The settings are: Auto(ESCD), Manual.IRQ ResourcesWhen resources are controlled manually, assign each system interrupt a type, depending onthe type of device using the interrupt.Please refer to section 3-9-1PCI/VGA Palette SnoopLeave this field at Disabled. The settings are Enabled, Disabled.3-9-1 IRQ ResourcesCMOS Setup Utility – Copyright(C) 1984-2001 Award SoftwareIRQ ResourcesItem HelpIRQ3 assigned to PCI DeviceIRQ4 assigned to PCI DeviceIRQ5 assigned to PCI DeviceIRQ7 assigned to PCI DeviceIRQ9 assigned to PCI DeviceIRQ10 assigned to PCI DeviceIRQ11 assigned to PCI DeviceIRQ12 assigned to PCI DeviceIRQ14 assigned to PCI DeviceIRQ15 assigned to PCI DeviceMenu Level >>Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard Defaults |
Related manuals for JETWAY 866AS ULTRA RAID
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine