|
223-4 Standard CMOS FeaturesThe items in Standard CMOS Setup Menu are divided into several categories. Each categoryincludes no, one or more than one setup items. Use the arrow keys to highlight the item and thenuse the or keys to select the value you want in each item.CMOS Setup Utility – Copyright(C) 1984-2004 Award SoftwareStandard CMOS FeaturesItem HelpDate (mm:dd:yy) Mon, May, 03 2004Time (hh:mm:ss) 16 : 45 : 35> IDE Primary Master Press Enter None> IDE Primary Slave Press Enter None> IDE Secondary Master Press Enter None> IDE Secondary Slave Press Enter NoneDrive A 1.44M, 3.25 in.Video EGA/VGAHalt On All,But KeyboardBase Memory 640KExtended Memory 56320KTotal Memory 57344KMenu Level >Change the day, month,year and century↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsDateThe date format is .Day Day of the week, from Sun to Sat, determined by BIOS. Read-only.Month The month from Jan. through Dec.Date The date from 1 to 31 can be keyed by numeric function keys.Year The year depends on the year of the BIOS.TimeThe time format is .Primary Master/Primary SlaveSecondary Master/Secondary SlavePress PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications ofyour drive must match with the drive table. The hard disk will not work properly if you enterimproper information for this category. If your hard disk drive type is not matched or listed, youcan use Manual to define your own drive type manually.If you select Manual, related information is asked to be entered to the following items. Enter theinformation directly from the keyboard. This information should be provided in thedocumentation from your hard disk vendor or the system manufacturer.If the controller of HDD interface is SCSI, the selection shall be “None”.If the controller of HDD interface is CD-ROM, the selection shall be “None”Access Mode The settings are Auto Normal, Large, and LBA.Cylinder number of cylindersHead number of headsPrecomp write precompLanding Zone landing zoneSector number of sectors
|
