JETWAY A353DMSR1A User Manual
                                                          | |
Contents
| 
343-11 Miscellaneous ControlThis section is for setting CPU Frequency/Voltage Control.CMOS Setup Utility – Copyright(C) 1984-2004 Award SoftwareMiscellaneous ControlItem HelpCPU Clock Ratio 8XSpread Spectrum Disabled** Current Host Clock isFSB Over Clock By 0 MHz** Current DRAM Clock isDRAM Clock at next Boot By SPDDRAM Over Clock By 0 MHzCPU Vcore Select DefaultVDIMM Select 2.50V(Default)AGP VddQ Select 1.50V(Default)Menu Level >↑ ↓ →← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsAuto Detect PCI/DIMM ClockThis item allows you to enable/disable auto detect PCI/DIMM Clock.Spread SpectrumThis item allows you to set the CPU Host/PCI clock and Spread Spectrum.The settings are: Enabled, Disabled.Host Clock at next Boot isThis item allows you to select CPU frequency step by step increasingThe choice are: 100MHz∼132MHz, 133MHz∼165MHz, 166MHz∼255MHz.DRAM Clock at next Boot isThis field displays the capability of the memory modules that you can useThe choice is either 100MHz or 133MHz or 166MHz or 200MHz.VDIMM SelectThis item allows you to select 2.5V of the DDR Module. The choice are: 2.5V, 2.6V, 2.7V, 2.8V.AGP VddQ SelectThis item allows you to select 1.5V of the AGP 4X/8X VGA card. The choice are: 1.5V, 1.6V. |
Related manuals for JETWAY A353DM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine