JETWAY P4X40DAR2A User Manual

JETWAY P4X40DAR2A User Manual Manual pdf 27 page image

25Sets the number of times a second to repeat a keystroke when you hold the key down. Thesettings are: 6, 8, 10, 12, 15, 20, 24, and 30.Typematic Delay (Msec)Sets the delay time after the key is held down before is begins to repeat the keystroke. Thesettings are 250, 500, 750, and 1000.Security OptionThis category allows you to limit access to the system and Setup, or just to Setup.System The system will not boot and access to Setup will be denied if thecorrect password is not entered at the prompt.Setup (default) The system will boot, but access to Setup will be denied if the correctpassword is not entered prompt.OS Select For DRAM > 64MBAllows OS2 to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.Set to OS/2 if using more than 64MB and running OS/2.3-6 Advanced Chipset FeaturesThe Advanced Chipset Features Setup option is used to change the values of the chipsetregisters. These registers control most of the system options in the computer.CMOS Setup Utility – Copyright(C) 1984-2002 Award SoftwareAdvanced Chipset FeaturesItem Help> DRAM Timing Settings Press Enter> AGP Timing Settings Press Enter> PCI Timing Settings Press EnterSystem BIOS Cacheable DisabledVideo RAM Cacheable DisabledMemory Hole DisabledMenu Level >↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsDRAM Timing SettingsPlease refer to section 3-6-1AGP Timing SettingsPlease refer to section 3-6-2PCI Timing SettingsPlease refer to section 3-6-3System BIOS Cacheable