JETWAY P4X40DAR2A User Manual
                                                | |
Contents
| 
31The Power Management Setup allows you to configure your system to most effectively saveenergy saving while operating in a manner consistent with your own style of computer use.CMOS Setup Utility – Copyright(C) 1984-2002 Award SoftwarePower Management SetupItem HelpACPI Function EnabledVideo Off Option Always offVideo off Method V/H SYNC+BlankMODEM Use IRQ 3Power Button Function Instant-OffPower After Power Failure Off> Wake Up Events Press EnterMenu Level >↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsACPI FunctionThis item allows you to Enabled/Disabled the Advanced Configuration and Power Management(ACPI). The settings are Enabled and Disabled.Video Off OptionThis determines the manner in which the monitor is blanked. The choice are Suspend → off,All Modes → Off, and Always On.Video Off MethodThis determines the manner in which the monitor is blanked.DPMS (default) Initial display power management signaling.Blank Screen This option only writes blanks to the video buffer.V/H SYNC+Blank This selection will cause the system to turn off the vertical andhorizontal synchronization ports and write blanks to the videobuffer.Modem Use IRQThis determines the IRQ in which the MODEM can use.The settings are: 3, 4, 5, 7, 9, 10, 11, NA.Power Button FunctionPressing the power button for more than 4 seconds forces the system to enter the Soft-Offstate. The settings are: Delay 4 Sec, Instant-Off.Wake Up EventsPlease refer to section 3-8-13-8-1 Wake up Events |
Related manuals for JETWAY P4X400DA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine