JETWAY PT800DB User Manual
Also see for PT800DB - REV 1.0: User manual
                                                            | |
Contents
| 
36Wake-Up on RTC AlarmThis function is for setting date and time for your computer to boot up. During Disabled, youcannot use this function. During Enabled, choose the Date and Time Alarm:Date(of month) AlarmYou can choose which month the system will boot up. Set to 0, to boot every day.Time(hh:mm:ss) AlarmYou can choose what hour, minute and second the system will boot up.Note: If you have change the setting, you must let the system boot up until it goes to theoperating system, before this function will work.IRQs ActivitiesPlease refer to section 3-8-1.13-8-1.1 IRQs ActivitiesCMOS Setup Utility – Copyright(C) 1984-2003 Award SoftwareIRQs ActivitiesItem HelpPrimary INTR ONIRQ3 (COM 2) EnabledIRQ4 (COM 1) EnabledIRQ5 (LPT 2) EnabledIRQ6 (Floppy Disk) EnabledIRQ7 (LPT 1) EnabledIRQ8 (RTC Alarm) DisabledIRQ9 (IRQ2 Redir) DisabledIRQ10 (Reserved) DisabledIRQ11 (Reserved) DisabledIRQ12 (PS/2 Mouse) EnabledIRQ13 (Coprocessor) DisabledIRQ14 (Hard Disk) EnabledIRQ15 (Reserved) DisabledMenu Level >>>↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard Defaults3-9 PnP/ PCI Configuration SetupThis section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect,is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself useswhen communicating with its own special components. This section covers some very technicalitems and it is strongly recommended that only experienced users should make any changes tothe default settings. |
Related manuals for JETWAY PT800DB - REV 1.0
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine