JETWAY V6DP User Manual
                                                | |
Contents
| 
21Primary Master/Primary SlaveSecondary Master/Secondary SlavePress PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specificationsof your drive must match with the drive table. The hard disk will not work properly if youenter improper information for this category. If your hard disk drive type is not matched orlisted, you can use Manual to define your own drive type manually.If you select Manual, related information is asked to be entered to the following items. Enterthe information directly from the keyboard. This information should be provided in thedocumentation from your hard disk vendor or the system manufacturer.If the controller of HDD interface is SCSI, the selection shall be “None”.If the controller of HDD interface is CD-ROM, the selection shall be “None”Access Mode The settings are Auto Normal, Large, and LBA.Cylinder number of cylindersHead number of headsPrecomp write precompLanding Zone landing zoneSector number of sectors3-5 Advanced BIOS FeaturesCMOS Setup Utility – Copyright(C) 1984-2003 Award SoftwareAdvanced BIOS FeaturesItem HelpAnti-Virus Protection DisabledCPU L1 Cache EnabledCPU L2 Cache EnabledQuick Power On Self Test EnabledHDD Boot Sprite DisabledATA & SCSI Boot Order ATA, SCSIFirst Boot Device FloppySecond Boot Device HDD-0Third Boot Device CDROMBoot other Device EnabledSwap Floppy Drive DisabledBoot Up Floppy Seek EnabledBoot Up NumLock Status OnGate A20 Option NormalTypematic Rate Setting DisabledTypematic Rate (Chars/Sec) 6Typematic Delay (Msec) 250Security Option SetupOS Select For DRAM > 64MB Non-OS2HDD S.M.A.R.T. Capability DisabledVideo BIOS Shadow EnabledMenu Level >↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5:Previous Values F6:Optimized Defaults F7:Standard DefaultsAnti-Virus Protection |
Related manuals for JETWAY V6DP
manualsdatabase
Your AI-powered manual search engine