Jabra A125s User Manual

Also see for A125s: Brochure Specifications User manual User manual

Contents

Jabra A125s User Manual Manual pdf 5 page image

RELEASE YOUR JABR A Jabra A125s Bluetooth music adapter• Within 1 minute the headset LED will start to flash and the adapter will start toflash slowly. Press play on your audio device. Sound will start to play in the headsetIf the headset LED is still solid blue after 1 minute repeat sections 2 and 3.NOTE: If you have a Jabra Bluetooth headset such as the Jabra BT620s, you canconnect your mobile phone and your ipod simultaneously.To pair two devices, first pair and connect your headset with your mobilephone (follow the instructions from your headset) and then pair your headsetwith the Jabra A125s as instructed above.8. Using the Jabra A125sStart playing music• Make sure that your headset is turned on before turning on the musicadapter. The music adapter will then connect automatically to your headset.• Tap the button on the music adapter or use your headset play/pause button*to play or pause the musicOther music features supported by your Jabra A1s*Playing music from your Bluetooth stereo headset such as the Jabra BT60s• The prominent center button on the right side of the device is the playbutton. On the top there are the skip forward and skip back buttons.To start play*• Tap the play button once.To pause*• Tap the play button – tap again to resume playing.Answer a call when playing music*• Tap the answer/end button to pause the music and the call will beconnected. The music will resume after the call has ended (depending on thedevice supporting this feature).Skip one track forward*• Tap the skip forward button - continue tapping to skip several tracks forward.Skip one track back*• Tap the skip back button - continue tapping to skip several tracks backward.Fast forward*• Press and hold the skip forward button.Fast rewind*• Press and hold the skip back button.* Device dependent - These features will work when the headset you areconnected to supports Bluetooth remote control (AVRCP) profile. The JabraBT620s Bluetooth stereo headset supports the Bluetooth remote control(AVRCP) profile.Connect to the headset manually• Tap the button on the music adapter. (Make sure that the headset is switched on)What’s in the pack?• Jabra A125s Bluetooth music adapter• USB charger for charging from any PC or laptop• User manual4. Getting startedThe Jabra A125s is easy to operate. The multi-function button performsdifferent functions depending on how long you press it:Instruction: Duration of press:Tap Press briefly and let goPress Approx: 1 secondPress and hold Approx: 5 seconds5. Charging your Jabra A125sMake sure that your Jabra A125s is fully charged for up to 6 hours before youstart using it. Only use the chargers provided in the box or Jabra approvedchargers such as the Jabra BT620s AC charger. Do not use chargers from anyother devices as this might damage your Jabra A125s.Connect the USB charger to your Jabra A125s charging socket (see fig 1)When the LED is solid red, your music adapter is charging. When the light turnsto green, the adapter is fully charged.6. Turning on your Jabra A125s• To turn on the Jabra A125s, press the multi-function button until you see aburst of flashes.• Press and hold the multi-function button to turn the device off.Note: There will be a burst of flashes and then a steady blinking as the productis searching for the headset that it previously paired with.7. Pairing with a Bluetooth stereo headsetBefore you use your Jabra A1s you must pair it with a Bluetooth headset• Make sure the headset and Jabra A125s are turned off1. Put the headset into pairing mode:Refer to your headset’s manual for pairing mode instructions, if you are pairingwith the Jabra BT620s:• Press and hold the answer/end button until the LED is solid blue.. Put your Jabra A1s in pairing mode• Press and hold the multi-function button until the LED light is solid blue. Connect your Jabra A1s to your iPod via the dock connector. Your Jabra A1s will find and connect to the headset