From the COM Port shortcut menu select a communications port thatis not assigned to any otherservice.3. Click OK.To remove a Bluetooth Serial Port: From the Bluetooth Configuration Panel, Local Services tab, select theport to be removed and then clickDelete.Note: The Delete button is only available when a Bluetooth Serial Port is selected.Dial-up Networking ServiceThe Bluetooth Dial-up Networking service makes it possible for a remote Bluetooth device to usea modem that is physically connected to this computer. The remote device can then access theInternet or log on to a remote network.Configure the Dial-up Networking ServiceFrom the Notification area, at the far right of the taskbar, right-click the Bluetooth icon, selectAdvanced Configuration > Local Services, and then double-click the Dial-up Networking service. Select the physical modem to be used from the Modems - shortcut menu. Set the common configuration properties of the service, and then clickOK.Fax ServiceThe Fax service allows a remote Bluetooth device to send a Fax via a modem that is physicallyattached to this computer.Configure the Fax ServiceFrom the Notification area, at the far right of the taskbar, right-click the Bluetooth icon, selectAdvanced Configuration > Local Services, and then double-click the Fax service. Select the physical modem to be used from the Modems - shortcut menu. Set the common configuration properties of the service, and then clickOK.File Transfer ServiceThe File Transfer service allows this computer to perform file operations on the Bluetoothexchange folder (and the folders and files it contains) of a remote device.To Use the File Transfer Service1. Right-click the Bluetooth icon and select Explore My Bluetooth Places.©2005 All rights reserved. 30