Jabra GN9330 - Headset - Over-the-ear Function Manual

Also see for GN 9350: Additional functions Use guide Setup and user guide

Contents

Jabra GN9330 - Headset - Over-the-ear Function Manual Manual pdf 5 page image

2. Setting upThis section contains set-up and connection instructions for your headset’s accessories andoptional functions.Note: Your Guide for basic set-up and use contains the primary set-up and connection instructions.GN 9350 GN 9330 GN 9330 USB2.1 Headset portIf your telephone has a port for headset, it is recommended to leave the handset cord in thetelephone. Connect the telephone’s headset port to the telephone port on the base. This willenable you to use the call button on your telephone, if there is one, and will limit the numberof cords coming out of your base.GN 9350 GN 9330 GN 9330 USB2.2 Default Outbound Call modeThe base is default set for telephone use. If you want to use your VoIP application as defaultcalling media, press the USB button for 5 seconds. If you want to change it back again,press the Telephone button for 5 secondsGN 9350 GN 9330 GN 9330 USB2.3 Connecting to the GN 1000 RHL (Remote Handset Lifter)(GN Netcom accessory)You may purchase a GN 1000 RHL as an accessory, which lets you answer and end telephonecalls while away from your desk. Please contact your vendor or visitwww.gnnetcom.com/gn9300/support for further details.To connect your GN 1000:1. Mount the GN 1000 to your telephone as described inits user manual.2. Plug RHL’s connection cord into headset base’s AUX port.The GN 9350 enables you to use electronic hookswitch(EHS) to answer and end calls while away from your desk.Feature is described in section 2.5.2.The remote answering and ending of calls is also available oncertain softphone/VoIP applications.4