Jabra M5390 User Manual

Also see for M5390: Setup guide User manual Datasheet Specifications Datasheet

Contents

Jabra M5390 User Manual Manual pdf 4 page image

6English7 EnglishSetting the outgoing volume3.10 Make a call (see section 4)to someone who can act as a testperson.3.11 Adjust the outgoing volumeusing the transmit volume controlon the base unit. Move the switchthrough the 3 settings until testperson confirms the appropriatevolume. 1)Setting the incoming volume3.12 During a call, adjust incomingvolume by pressing the Volumebutton on the headset.3.13 A tone will be heard to indicatewhen min./max. volume is reached.3.113.12 3.133.101)Note: If you can hear your own voice, the outgoing volume is probably too high. Reduce the volume setting onyour desk phone (if the feature is available) and compensate by increasing the volume on your headset.4.54.64.74.84.54.64.74.84. Setting up your cell phoneSetupPairing your headset with your cell phoneNOTE:Before use, please charge your headset (see 3.4).Before using your Jabra M5390 Multiuse headset with a cell phone, you need to pair it with yourcell phone.• Make sure the headset is off.• During start-up keep pressing the Answer/End button for three seconds. Alternatively removethe snap-on cover and press the reset button on the headset for three seconds. The visualindicator on the headset will turn to steady blue. (see 9.1)• Instruct your phone's Bluetooth ® to ‘discover’ the Jabra M5390 Multiuse headset:o Follow the instructions in your phone’s User Manual. This usually involves going to a ‘setup,’ ‘connect’or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.o Your phone will find the Jabra M5390 Multiuse headset and ask if you want to pair with it.• Accept pairing by pressing Yes/OK (or similar) on the phone and confirm with the passkey orPIN ‘0000’ (4 zeros).• Your phone will confirm when pairing is complete. If pairing is unsuccessful, repeat the stepsabove. Some cell phones require a manual connection to be established after pairing. Note thaton some cell phones, the headset has to be set as “Trusted device”.NOTE:If you accidentally put the headset into pairing mode, tap the Answer/End button to exitpairing mode.IMPORTANT:The same headset can be paired with multiple cell phones. However, if you havemultiple cell phones paired, switched on and within range of the headset, the headset will not be ableto connect to the base. It is only possible to be connected to one cell phone and the headset base ata time. To be able to connect to the headset base, only have one paired cell phone may be turned onand within range of the headset.