6englishJabra StonePAIRInG It WItH YoUR PHoneHeadsets are connected to phones using a procedure called‘pairing’ by following a few simple steps, a phone can be pairedwith a headset in a matter of seconds1 Put the headset in pairing mode1 a First time pairing- take the headset out of the portable charging unit theheadset will automatically start up in pairing mode (showingflashing blue light on the Jabra StatusDisplaytM) and startsearching for a device1 b Pairing with another phone or re-pairing- take headset out of the portable charging unit turn theheadset off by long press on answer/end button turn theheadset on again by long press on answer/end – keep pressinguntil StatusDisplaytM show flashing blue light2 Set your phone to ‘discover’ the Jabra STonE- Follow your phone’s instruction guide First make sure thatis activated on your mobile phone then set yourphone to discover the headset this usually involves goingto a ‘setup,’ ‘connect’ or ‘ ’ menu on your phone andselecting the option to ‘discover’ or ‘add’ a device *3 Your phone will find the Jabra STonE- the phone will find the headset under name “Jabra Stone”- Your phone then asks if you want to pair with the headset- accept by pressing ‘Yes’ or ‘oK’ on the phone If your phoneasks for passkey or PIn confirm with 0000 (4 zeros) Your phonewill confirm when pairing is complete Jabra Stone supportsversion 2 1 including Simple Secure Pairing meaningthat the headset can be paired with a phone or otherdevice without using PIn or passkey but only if the otherdevice supports version 2 1 alsoCONNECTIVITYSELECTMobilSurfBLUETOOTHInfrared portWap optionsSynchronizationNetworksDEVICES FOUNDJabra STONEJabra STONEOKPasskey:****HANDSFREESELECTJabra STONEadded.The handsfree isnow ready for useSELECT* refer to phone’s user manual
