Jacuzzi BY82000 Installation And Operating Instructions Manual

Contents

Jacuzzi BY82000 Installation And Operating Instructions Manual Manual pdf 4 page image

Important: Read complete instructions before beginning installation.Each unit arrives ready for installation, equipped with base, glass and associated hardware.Remove the unit from the carton. Retain the shipping carton until satisfactory inspection of the product has beenmade.Immediately upon receipt, inspect the base and other components before installing. Check all carton inserts forparts and hardware. Should inspection reveal any damage or defect in any component, do not install the unit. Damageor defect to any component claimed after the unit is installed is excluded from the warranty. Jacuzzi Whirlpool Bath'sresponsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any claimsfor damage to the carrier. For definitions of warranty coverage and limitations, refer to the published warrantyinformation packed with the product.Jacuzzi Whirlpool Bath © is not responsible for any defect that could have been discovered, repaired, or avoided byfollowing this inspection.DIMENSIONSBASE SPECIFICATIONSPRODUCT WEIGHT (Base and Enclosure )950 lb(431 kg)TOTAL WEIGHT/FLOOR LOADING1266.6 lb (574.5 kg)63.3 lb/sq. ft. (332.1 kg/m2 )SPECIFICATIONSNOTE: MINIMUM WATER PRESSURE FOR THE SYSTEM IS 45 PSI WITH 3/4" HOT & COLD SUPPLY SERVICE.48"27-11/16"TOP VIEW72"1/2" FLEXIBLEWATER SUPPLYHOSES UNDERBASE(BOTH SIDES)AIR SUPPLY HOSEFRONT VIEW4-1/2"18-11/16"1-1/2" TILE FLANGE6-1/2"27-1/4"30-1/4"21-1/16"2Jacuzzi Whirlpool Bath © BY82000 03/05