Jacuzzi Finestra FL61000 Installation & Operation Instructions

Also see for Finestra 6030: Specification sheet

Contents

Jacuzzi Whirlpool Bath: finestra Walk-in Bath Page 16 fl61000B • 10/07BlowerstatusLEDsLeft air valve,Status LEDsRight airvalve,Status LEDsBathlightRight airvalveLeft airvalveAir bathPump/Motorstatus LEDsWavefunctionOn-OffPump/MotorToggleswitchesControl Panel switchesair Bath switchPressing this button will activate the blower usingthe Toggle buttons to increase/decrease air flowfrom the blower. Blower air can be adjusted fromlow air to maximum air.air Bath status leDThe Air Bath Status LED will show four LED lightsat maximum air and only one LED light when theair is turned OFF. Each additional LED indicatesmore air flow.toggle switchesThe Toggle buttons, up and down , act on each ofthe other switches to increase, decrease, or modifyfunctionality. Use the up arrow to increase and thedown arrow to decrease.• Pressing a toggle button after pressing thePump/Motor button will increase or decreasespeeds on the Pump/Motor. If the pump/motoris on HIGH speed press the down arrow toselect LOW speed. If the pump/motor is onLOW speed press the up arrow to select HIGHspeed.• Pressing an up or down toggle button afterpressing the Bath Light button once willincrease or decrease the white light brightness.Pressing an up or down toggle button afterpressing the Bath Light button twice will begincycling the light colors.Leave the colors cycling or press the sametoggle button again to stop the color cycling.With the lights stopped on a color pressing theBath Light button a third time will turn OFF thelight. (A favorite color will be saved ONLY whenthe cycling has been stopped on that color andthen turned OFF.)Pump/Motor switch (ON/OFF )Pressing the button will turn ON the two speedpump/motor at HIGH speed. Pressing a secondtime will turn OFF the pump/motor. To changespeeds use the Toggle buttons.Pump/Motor status leDWhen the pump/motor is ON at HIGH speed allfour LED indicator lights will be lit. When thepump/motor is ON at LOW speed the bottom LEDindicator light will be lit.left air Valve switchPressing this button will activate the left air valvesusing the Toggle buttons to increase/decreaseair flow to the left set of jets. The air flow can beadjusted from no air to maximum air.left air Valve status leDThe Left Air Valve Status LED will show four LEDlights at maximum air and only one LED lightwhen the air is turned OFF. Each additional LEDindicates more air flow.right air Valve switchPressing this button will activate the right airvalves. Use the Toggle buttons to increase/decrease air flow to the right set of jets. The airflow can be adjusted from no air to maximum air.right air Valve status leDThe Right Air Valve Status LED will show fourLED lights at maximum air and only one LED lightwhen the air is turned OFF. Each additional LEDindicates more air flow.Bath light switch (ON/OFF )Pressing this button will turn ON the white bathlight(s). Pressing the Toggle buttons at this timewill increase or decrease light intensity.Pressing the button a second time will accessthe saved favorite color. To cycle lighting colorsuse the Toggle button. Pressing the Togglebutton again will stop the light cycling. The colordisplayed when the cycle has been stopped will besaved as your favorite color.Pressing the button a third time to turn OFF thelight.Wave Function switch (ON/OFF )Pressing this button activates wave action byopening and closing air valves. Pressing a secondtime will turn OFF the wave action.When pressing this button after pressing thePump/Motor button or the Air Valve button, thewave action will work on both Right and Left Airvalves.note: When switching between functions, the LED forthe inactive functions will dim and the active function willbrighten. (Continued)