J-20011.6 Programming the CLEARRAY (Ultraviolet) Water PurificationSystemA. Programming the CLEARRAY System (U) or Corona DischargeOzone (O3)Press and hold the Jets pump 1 ( 1 ) and Cooler ( ) button at thesame time for 3 seconds to enter the sanitizing system program. Thescreen will display one of the two menus below:CLEARRAY Menu O3 Menu1. If the LED screen is displaying “U” then pressing the Jets pump1 will change the sanitizing system from “U” to “O3” and exit theprogramming menu. If the LED screen is displaying “O3” thenpressing the Jets pump 1 will change the sanitizing system from “O3”to “U” and exit the programming menu.Note: For the O3 option the “=” disables the duration countdown timer.2. If you do not wish to change the option do not press any buttons andafter 10 seconds the display will return to the main menu.Note: If the CLEARRAY System has been selected, when thetime allotted has expired (365 days) the display screen willflash between the water temperature and “blb.” At this time the UV bulbmust be replaced, the quartz tube must be cleaned and the durationcountdown timer needs to be reset.PressorPressor30
