Jacuzzi J-200 Series Owner's Manual

Also see for J - 210: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

Jacuzzi J-200 Series Owner's Manual Manual pdf 37 page image

J-20011.4 Programming the CLEARRAY® TimerA programmable change bulb timer can be set to remind you when towhen it is time to replace the UV bulb for the CLEARRAY system.• The default setting is for 365 days.• The timer range is from OFF to 365 days, in increments of 10 days.Note: It is not recommended that this feature be turned OFF. In order tocontinually have the CLEARRAY system effectively preform its function,it should be program as instructed.A. Programming or resetting the timer.Note: If no button is pressed within 5 seconds of eachselection the screen will revert back to the Main Menu and thecurrent settings will remain active.1. Press until you get to the “UV” Menu. The display will scroll“CLEARRAY BULB.” After the second scroll, if no action is taken,the system will revert back to the Main Menu.2. Press or to prepare the system for changes. Continuallypress to adjust the length of time for the timer.3. Once you select the number of days, press 1 to confirm thisselection. The system will return to the “CLEARRAY BULB” Menu.4. Once the timer expires the display will alternate between the watertemperature and “CHANGE CLEARRAY BULB” page 48.11.5 Programming the Water Refresh TimerA programmable water refresh timer can be set to remind you when towhen it is time to drain and refill your hot tub.• The default setting is for 180 days.• The timer range is from OFF to 180 days, in increments of 30 days.Note: It is not recommended that this feature be turned OFF. In order tocontinually maintain the water healthy and clean, in addition to chemicalmaintenance, it should be program as instructed.A. Programming or resetting the timer.Note: If no button is pressed within 5 seconds of eachselection the screen will revert back to the Main Menu and thecurrent settings will remain active.1. Press until you get to the “H2O” Menu. The display will scroll“WATER REFRESH.” After the second scroll, if no action is taken,the system will revert back to the Main Menu.2. Press or to prepare the system for changes. Continuallypress to adjust the length of time for the timer.3. Once you select the number of days, press 1 to confirm thisselection. The system will return to the “WATER REFRESH” Menu.4. Once the timer expires the display will alternate between the watertemperature and “CHANGE WATER” page 49.33